enum TlpSpeed

DESCRIPTION

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

VALUES

tlp1200Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

tlp2400Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

tlp4800Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

tlp9600Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

tlp19200Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

tlp38400Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

tlp57600Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.

tlp115200Bauds

These constants are used to indicate the speed in baud to use on the line which connect the palm to the reader device. The default speed (used by the reader on reset, and by this library after TlpOpen) is 9600 bauds.